Cisco Routing and Switching Field Specialist
Books
This vendor-specific certification is offered by:
Cisco Systems
San Jose,
CA,
USA
Phone: 800-553-6387
Email: ciscotraining@cisco.com
Skill Level:
Intermediate
Status:
Active
Certification Summary:
Designed for Cisco Channel Partners and Resellers, the Cisco Routing and Switching Field Specialist can successfully install, configure, monitor, and support the advanced capabilities of Cisco routing and switching solutions including expertise in Border Gateway Protocol (BGP), Multi-Protocol Label Switching (MPLS), Quality of Service (QoS), High Availability (HA), WAN optimization, and IP version 6 (IPv6).
Initial requirements:
You must hold a valid CCNP or any CCIE certification. You must then pass three exams: Advanced Routing and Switching for Field Engineers ($150), Wide Area Application Services for Field Engineers ($150), and Lifecycle Services Advanced Routing and Switching ($65). Training is available but not required.
Continuing requirements:
Certifications are valid for two years. To recertify, you must re-take and pass all exams for this certification. Please note: this includes ALL exams whether refreshed or not. Alternatively, you can pass a current CCIE or CCDE written exam. Achieving or recertifying CCDE or any CCIE automatically extends your active Specialist certification(s) up to the point of expiration of the last certification achieved.
Low Cost:
$365
High Cost:
$0
Online resources:
Not Available
Offline resources:
Not Available
All certifications from Cisco Systems
Vendor's page for this certification
